Audiofier - Riffendium Collection KONTAKT (Sept 2020)

RIFFENDIUM SERIES is a collection of thematic samples for contemporary producers and composers. It includes loops of real, modeled, synthesized and developed instruments, providing an original palette of inspiring sounds for electronic and organic music creators. Our first release in this series is a collection of electric guitar loops that spans from clean ballad strumming and arpeggio techniques to frantic grunge rock guitar riffs.

The new 1.01 update of this new series includes 2 + 2 instruments: RIFFENDIUM and RIFFENDIUM REV, as well as their counterparts DI and REV DI, combined into one package. The RIFFENDIUM sample pool consists of amp outputs and offers ready-made guitar sounds for fast workflow. RIFFENDIUM REV offers the same sample pool, but adds the ability to flip each piece to create exciting new guitar parts and soundscapes. RIFFENDIUM DI and REV DI offer samples taken from the guitar output, allowing you to use your favorite amp simulator and guitar chain to match your music perfectly.

Create unique custom loops with the RIFFENDIUM articulation sequencer. Since the articulation comes from a real performance, the result will always sound like a real guitarist is playing a new guitar part. Start with one of 44 original recordings, then edit, regroup, randomize, save new guitar parts. This first installment includes useful guitar loops that suit a wide range of music styles, from rock to film scoring.
The Riffendium engine makes it incredibly easy to create guitar sound that suits your song, but it also lets you create extraterrestrial sounds, in

which you will not believe that they arose from the guitar playing. And now, with RIFFENDIUM REV and REV DI, you can control your performance on a whole different level! Outdated loops are unlikely to fit into your musical chords, and as a result they will repeat the same thing over and over. RIFFENDIUM loops will follow your chords as they were recorded in most major and minor scales (and not only). RIFFENDIUM loops use looping algorithms, so in each loop the loop will sound a little different than in a real guitar performance.

RIFFENDIUM provides direct amp output and various cabinet simulations for more flexibility. You can also bypass the RIFFENDIUM speaker modeling and use your favorite cabinet impulse responses. In addition, 4 distortion effects, 4 modulation effects are available, as well as main delay and reverb for additional sound customization.

RIFFENDIUM includes 100 presets to help you get started and showcase your potential. From traditional guitar sounds to experimental madness. But it's up to you to decide what he is capable of.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Read More »

Overloud - TH-U Full v1.2.1 (Sept 2020)

TH-U is a colossal new version of Overloud's flagship software. The world's largest collection of 239 models and no less than 1000 presets covering all musical styles. Building on the now discontinued TH3 Full, the TH-U features 15 new amps, including Superlead and Superbass models, Polytone jazz amps and DVmark Triple 6. It also comes with 14 new cabinets. Also new is the Rig Player, which reproduces models taken from real R2M (Rig To Model) technologies. Amp Tweaks allows you to modify amps by tweaking pre-tubes and power tubes. In addition, a Shimmer reverb delay has been added, and the Cabinet IR module has been improved and reworked.

Included Rigs Expansion Library :
  • Slate Edition
  • American Classics
  • British Classics
  • Choptones Brit 1987
  • Choptones Fried BE50D
  • 239 models, the world's largest collection into a single software, including:
  • 89 guitar amplifiers and 4 bass amplifiers
  • 50 guitar cabinets and 2 bass cabinets
  • 77 pedal and rack effects
  • 18 microphone models, with up to four mics on each cabinet
More than 1000 presets covering all musical styles
Randall®, DVmark®, Brunetti® and THD® authorized models approved by the original manufacturers
Amp Tweak technology, allows you to mod the amplifiers by changing the preamp and poweramp tube models, as well as simulating the action of a variac
Rig Player (with 20 factory rigs), allows you to reproduce rig models created by sampling real setups
One entire preset bank dedicated to bass.
4th generation analog emulation technology, with proprietary nonlinear processing algorithm
3D, gap-less positioning of microphones and room simulation
Advanced cabinet emulations with ReSPiRe 2 technology
Built-in convolver to load external guitar cab IRs
Flexible sound chain with split point for parallel processing
Fully customizable MIDI control for live usage
BREVERB and SpringAge based reverb effects
Full compatibility with TH3 user presets

TH-U is able to load rig models created from real setups.
The Overloud proprietary technology allows our engineers to sample and capture the response of an entire rig, including the nonlinear and dynamic response of the amplifier, the cabinet, the microphones, the mic preamplifier and the room sound. Rig To Model technology allows you to capture both analog and digital setups. The Rig Player, integrated into TH-U, allows you to reproduce any nuance of the sampled rigs.

Thanks to its innovative dsp technology, TH-U features a new panel which allows you to change the pre and power tubes models, as well as to simulate the action of a variac. This allows you to mod any amplifier model with an almost limitless combination of tubes and opens the product to new sound capabilities.
15 new amplifiers, including the Superlead and Superbass models, Polytone jazz amplifiers and DVmark Triple 6 head
14 new cabinets
Rig Player (with 20 factory rigs), reproduces models captured from real rigs with the R2M (Rig To Model) technology

Amp Tweak: mod amplifiers by customizing pre and power tubes
A Shimmer Reverb and a Shimmer Delay
An improved and redesigned Cabinet IR module
A new multitrack looper
Search function on the preset and bank lists
Integrated Rigs Expansion Library :
  • American Classics
  • Brit Silver Jub
  • British Classics
  • Choptones Add A MP1
  • Choptones Angel Scream
  • Choptones Bogie JPC2
  • Choptones Bogie RK6L6
  • Choptones Bogna XTC
  • Choptones Boogie MKV
  • Choptones Brit 1959 RR
  • Choptones Brit 1987
  • Choptones Brit J1 Preamp
  • Choptones Carved Vai
  • Choptones Fend SRev
  • Choptones Fend Trem63
  • Choptones FendEdge
  • Choptones Fried BE50D
  • Choptones Fried Lilbox
  • Choptones Ornage DA30T
  • Choptones Pivy 65
  • Choptones Rand Sanat
  • Choptones Suur Cus 100TP
  • Choptones Tone Impera
  • Choptones Vocs 30C1
  • LRS Eddied EL34
  • LRS Unchained
  • Mad-in-Italy MK50 Rock
  • MF T&B 008
  • MF T&B 3Classic
  • Vintage Collection 1
  • Vintage Collection 2
System Requirement
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Via Torrent

Overloud - TH-U Full 1.2.1
Read More »

Cinematique Instruments - KLANG VINTAGE SYNTH: Velvet Blend KONTAKT (Sept 2020)

Warm sounding strings are a separate song and we made sound out of it!
There is hardly any other category of instruments that has more instruments and sounds than vintage synthesizers. That is why it was a great pleasure for us and at the same time an obligation to show how we feel about these ancient treasures and how we realize them.

We took the sounds of high-end synthesizers like the Yamaha CS-60, Juno 60 or other analog machines and created a huge string patch that sounds like infinity ... Then we added some filters, phasers and other little things, and the perfect velvet sound is ready.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Read More »

IK Multimedia - MixBox v1.0 (Sept 2020)

Limitless sonic options. Right at your fingertips. MixBox packs 70 award-winning mixing processors and creative effects derived from T-RackS, AmpliTube and SampleTank into a convenient 500-series style plug-in. Create, compare and save your own custom channel strips or multiFX chains, or choose from over 600 presets to give your creativity a kickstart. Whether in your favorite DAW or stand-alone, MixBox combines a massive range of effects and powerful workflow to supercharge your mixes.
Features of IK Multimedia MixBox
  • Create your own custom channel strips
  • 70 FX from T-RackS, AmpliTube & SampleTank
  • Dynamics, EQs, Filters, Modulation, Channel Strips, Saturation, Reverbs, Delays, Distortion and Amps
  • 4 all-new algorithms for hall, room, plate and inverse reverbs
  • Chain up to 8 processors in a single instance
  • Lightning-fast workflow with all controls at your fingertips
  • Save and recall entire chains, instantly
  • Over 600 presets for every situation, including single processor and whole-chain presets
  • Stand-alone hosts up to 8 full racks for live mixing
Build your own custom processor chains
MixBox lets you choose from 70 different effects to create a custom processor chain in a single “rack.” 8 slots per rack let you design the exact channel strip you want, then save it for later recall.
With a quick drag & drop workflow, you’ll be able to assemble chains instantly and get right to work shaping your music from one central workstation.

70 different processors to choose from
Derived from IK’s award-winning T-RackS, AmpliTube and SampleTank plug-ins, every processor offers immaculate sound, from powerful digital effects to warm, authentic physical models of classic analog gear. And for reverb, MixBox offers 4 all-new, massively improved algorithms for hall, room, plate and inverse.

A modeling powerhouse
MixBox includes ultra-precise digital models of some of the most iconic mixing gear in history like the LA2A, 1176, 1073 EQs, 4000-series channel strips, plus creative models like amplifier distortion and even tape saturation.
Get the gear collection of your dreams right at your fingertips including all of the gear and FX below.

Faster, more convenient workflow
MixBox supercharges your workflow, keeping every parameter immediately at hand in a compact, efficient, and easily editable GUI. No more juggling plug-in windows to adjust two or more effects at once!
A Dry/Wet slider is located on every single module to put you in full control of your final sound, and with the ability to save entire processor chains, you can easily recall your favorite combinations to use time and time again.

Covers all your FX needs
Whether you’re tracking vocals, warming up virtual instruments, customizing a Splice groove or diving deep into sound design, MixBox will always have the right effect for you. Together with the typical EQ Dynamics and Channel Strip processor you would expect to find, you also will have Filters, Modulation, Saturation, Reverbs, Delays, Distortion, and Amps.

Instant inspiration with hundreds of presets
Need a place to get started? MixBox comes packed with both individual processor and whole-chain presets, covering a range of uses, styles, genres and more.
Plus, you can easily save and recall your own presets for future use.

Precise gain staging & side-chain input
MixBox also offers individual gain and dry/wet controls for each processor, letting you precisely control gain staging just like you would with real hardware.
An additional sidechain input lets you trigger effects like compression from a second signal, to tighten up kick drums and basses, or pump your master bus.

Powerful multi-rack live mixing in stand-alone mode
MixBox’s stand-alone mode gives you a complete mixing experience, with up to 8 separate racks of 8 processors each.
Just feed audio into your computer from any source, whether a digital mixer or audio interface, and you’ll have a highly optimized mixing environment to meet the needs of virtually any mixing situation.
The main panel gives you control over all 8 racks at once. Load rack presets, add or remove processors from each rack, activate side-chain and manage input/output channels and gain for each rack, all from one panel.
It’s everything you need to create complex mixes in one easy-to-use window.
System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Via Torrent
Read More »

Toontrack - Latin Cuban Percussion EZX (Sept 2020)

Toontrack has announced the release of the Latin Cuban Percussion EZX expansion for EZdrummer 2 and Superior Drummer 3, recorded by acclaimed percussionist Richie Flores and Grammy Award-winning engineer Dave Kowalski at Sear Sound Studios in New York.

The Latin Cuban Percussion EZX was envisioned as a percussive complement to the Latin Cuban Drums EZX and features a collection of the most common percussion instruments used in the wealth of music sorted under ‘Latin’: congas, timbales, bongos, guiros, shakers, woodblocks, cowbells and more. It was recorded alongside its EZX counterpart at New York’s renowned Sear Sound Studios by Grammy Award-winning and Emmy-nominated engineer Dave Kowalski and sampled by undoubtedly one of the world’s most in-demand percussionists, Richie Flores.

Richie, Brooklyn-born but raised in Puerto Rico, embarked on his journey as a professional percussionist already at the age of 13 and was the youngest musician to ever travel with a band outside Puerto Rico. Since then, he has played with some of the most celebrated artists in Latin music, performed on several Grammy Award-winning records and continued to perfect his musical voice.

If the drums paint the bigger picture and act as the rhythmic heartbeat, percussion is what fills in the blanks and makes sure all the glaring colors and hallmark Latin accents indefinitely shine through. Simply put, in Latin music, percussion is just as essential to the groove as the groove itself. Welcome to your new go-to collection, handpicked by one of today’s number-one performers and captured in stunning detail – encapsulated by the iconic aura of the Sear Sound room.

Latin Cuban Percussion EZX features
•Recorded at Sear Sound Studios, New York.
•Produced by Grammy Award-winning and Emmy-nominated engineer Dave Kowalski.
•Sampled by percussionist Richie Flores.
•Includes the essentials of traditional Latin and Cuban percussion: congas, timbales, bongos, guiros, shakers, woodblocks, cowbells, cajon and much more.
•Comes with MIDI performed by Richie Flores.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]
INSTAL Latin Cuban Percussion EZX

Read More »

Native Instruments - Kontakt 6 v6.4.1 (Sept 2020)

With KONTAKT 6, you can sound like a snare drum, a symphony orchestra, or anything in between, from a universe of sampled instruments. It’s a simple sampler when you want it to be, and a deep sonic scripting laboratory when you need something more. The next generation of the world’s favorite sampling platform gives you new instruments and new features under the hood – so you can layer, link, stretch, and shape your sounds any way you can imagine.

Additional functionality:
1. Activation of protected libraries is not required, the ability to register (add to bookmarks) in batch mode.
2. Ability to edit patches of protected libraries.
3. Ability to re-save with samples of patches from protected libraries.
4. Ability to edit password-protected scripts.

What’s New
6.4.1 — 2020-09-01
Bug fix.
  • FIXED Certain libraries (Cinematic Studio Strings and others) could cause incorrect long release notes under certain conditions
  • FIXED Batch resaving certain libraries could crash Kontakt
  • FIXED User Zone based instruments could crash Kontakt under certain conditions
  • FIXED Supercharger appeared in the wrong place in the menu
System Requirement
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Via Torrent
Kontakt 6.4.1 WIN
Read More »

Toontrack - MIDI PACK EZKEYS - EZX or SDX (Sept 2020)

From extreme Metal, Jazz, Country, Funk and Americana to Blues, Hip-Hop, R&B, Pop, Reqqae, Disco and Rock – the MIDI Line offers pro-played MIDI for any sonqwritinq need. You can download 71 MiDi packs by Toontrack in one Bundle! These MiDi packs are for EZkeys, EZdrummer and Superoir Drummer. Enjoy!

Installation DRUM MIDI:
Installation: Complete replacement of the contents of your MIDI folder
By default the MIDI folder is located:
- for MacOSX users / Library / Application Support / EZDrummer /
- for Windows users C: \ ProgramData \ Toontrack \ EZdrummer \

completely replace the MIDI folder with the folder from the downloaded image
* ( if there is no EZDrummer folder, then you need to create it )

2. After that open Superior Drummer 3 , click: Settings> Advanced> Restore MIDI Database ...
3. On the Grooves tab , in the list of midi-groove libraries from Platinum Samples, Groove Monkee and Steven Slate Drums Grooves , where there are orange folders with an exclamation mark, click Add Database .

- If you want the MIDI folder to be in a different location, move this folder and after opening SD3 , in the Grooves tab you will find the error No MIDI library found

click on Libraries Settings and in the Additional Libraries tab select the new location of the MIDI folder ( and reload Superior )

Installation EZKEYS MIDI:
Installation: Complete replacement of the contents of your MIDI folder
By default the MIDI folder is located:
-for WINDOWS - С: / ProgramData / Toontrack / EZkeys /
-for MacOSX - / Library / Application Support / EZkeys /

  • Superior Libraries
  • Add-On Packs
  • EZX Libraries
  • EZdrummer Libraries
  • Platinum Samples Libraries
  • Groove Monkee Libraries
  • Steven Slate Drums Grooves
  • Ugritone Drums Midi Packs
System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Via Torrent
Toontrack - DRUM MIDI PACK
Read More »

Overloud - GEM Voice v1.0.1 (Sept 2020)

A comprehensive vocal production plug-in based on analog processors
VOICE is the new Gem plug-in designed for vocal processing.
VOICE offers a comprehensive and streamlined vocal production workflow, based on analog processors
  • a Mic Preamplifier (4 models)
  • a Tape Simulator (3 tapes + 3 special modes)
  • a Vocal Enhancer
  • a De-Boxer and a De-Esser
  • a Dynamic Processor with compressors (5 models) and an expander-gate
  • an Equalizer (5 models)
  • a Space Processor / Reverb Unit
  • an Analog Delay
  • a Master Section with an optional Limiter
  • an inteactive Dynamic Display
  • an interactive EQ Display
System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Via Torrent
Overloud - GEM Voice v1.0.1

Read More »

Toontrack - The Rooms Of Hansa SDX Library Update v1.0.1 (Sept 2020)

The Rooms of Hansa SDX features drums produced by Grammy Award-winning recording/mixing engineer Michael Ilbert in one of the most iconic studios currently in existence: the Hansa Tonstudio in Berlin, Germany. With a broad and handpicked collection of drums captured in all four available rooms on the studio premises, this SDX showcases an incredible width in regard to both tonal range and ambience.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

Toontrack - Classic Rock EBX v1.0.0 SOUNDBANK (Sept 2020)

Classic Rock EBX is an extension to EZbass that features carefully recorded 1960s bass. This bass, selected for its optimal quality, embodies all the wants and needs that you would look for in a rock instrument’s workhorse: low frequencies, high harmonics and that bright and distinct sustain that permeates any mix. Simply put, it’s the bass that oozes rock when you hit one note.

Aside from the actual instrument, the EBX also includes a broad selection of presets for all tools and striking options as well as a custom collection of MIDI, making this much more than just a bass sample library – it’s a well of ideas and a true toolbox of sound.

Can you imagine an earth-shattering groove without the raw power of the bass? Without that deafening rumble that perfectly interlocks with the drums and melds everything into the thunderous wonder that spells classic rock? Of course not. Welcome to your new go-to bass.

Instructions :
  • This library requires a new version of EZbass 1.0.6 . this version is not yet popular among the people, there is a workaround:
  • This solution works only with the version of EZbass 1.0.0 (Team VR)
  • Unpack to the folder with the library. You should also change the version in the Aversion file from 1.0.6 to 1.0.0.
System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Via Torrent
Read More »

Toontrack - Latin Cuban Drums EZX SOUNDBANK (Sept 2020)

While rhythm may be the heartbeat of most genres, in Latin music the pulse and the beat is the very lifeblood. In fact, in many ways the groove is the song. Welcome to the Latin Cuban EZX, a mix-ready battery of kits tailored for just that – infectious latin-flavored rhythms for anything from traditional to modern.

The Latin Cuban Drums EZX features a handpicked collection of drums and a selection of mounted percussion pieces such as bells, woodblocks and a timbale. It was all captured at the famed Sear Sound Studios in New York by a team with a much-prominent status in the broad field of Latin music: Grammy Award-winning and Emmy-nominated engineer Dave Kowalski and drummer Robby Ameen. Between them, their work spans from the early ’80s through to today and includes collaborations with numerous top artists, awards and accolades. In fact, Robby is arguably one of the most influential Latin-oriented drummers of the past few decades with books, instructional videos and much more on his CV – all on the subject of drums in Latin music.

Welcome to two custom kits tailored for Latin and Cuban music, recorded in the aura of a classic New York room by one of the most well-versed drummers in the field – all at your fingertips.

•Recorded at Sear Sound Studios, New York
•Produced by Grammy Award-winning and Emmy-nominated engineer Dave Kowalski
•Sampled by drummer Robby Ameen
•Features two of Robby Ameen’s custom kits, four crash cymbals, two cymbal stacks, four ride cymbals, two standard hi-hats and one right-hand FX hi-hat
•Side of the floor tom sampled to mimic the traditional ‘cascara’ playing style
•Also includes two mambo bells, two songo bells, two “left-foot” cowbells, one “left-foot” woodblock, one woodblock and a timbale
•Comes with MIDI performed by Robby Ameen

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]
Read More »

UrsaDSP - Boost v1.1.32 (Sept 2020)

Coming from UrsaDSP, Boost increases the loudness of audio material. Use it as a signal enhancer during mastering, or to reveal hidden details while mixing or creating new sounds. Set the Output Ceiling, dial in Attack and Release times, and use the main Boost dial to get anything from a gentle increase in average loudness to an all-out smashed-up signal. UrsaDSP Boost applies transparent signal maximization for a professional sound, and thanks to the unique Focus control, you can maximize a signal upwardly, applying more gain to quieter sounds – NO CLIPPING, ever. A Drive control (plus extra Punch setting for transients) are on-hand to add energy and warmth to the signal.

Features of UrsaDSP Boost v1.1.32

  • Increase average loudness with no clipping and minimal distortion
  • UrsaDSP’s Trajectory Technology detection algorithm maximizes gain at every step
  • Focus control can push quiet sections harder than loud sections and reveal hidden details in audio with up to 52dB dynamic gain
  • Set Input gain up to 28dB and Output ceiling up to 0dB – Boost’s algorithms mean there’s no clipping, ever
  • Choose Attack and Release times to complement your audio
  • Add harmonic distortion using the Drive control
  • Activate the extra Punch setting to add more power to transients
  • Set Max Gain to keep very quiet sounds unaffected
  • Compare signals with the Bypass button
System Requirement
Windows 7 | 8 | 8.1 | 10 [64-bit]

Via Torrent
UrsaDSP - Boost v1.1.32 WIN
Read More »

Splash Sound - Ukulele KONTAKT (Sept 2020)

Two stereo pairs of condenser and dynamic microphones- it’s up to you what to choose. Maybe you decide to use them at the same time as double track – how you wish.

5 RR layers, perfect dynamics, built-in effects and presets, maximally natural sound, strum, solo, mute and percussion patches… this is all about “UKULELE” library.

4 Instrument patches
Made for KONTAKT 5.6.8 or higher (not compatible with free KONTAKT PLAYER)


  • Built-in 24 strum patterns with auto time-stretch
  • Single key chord selection in Strum mode
  • Volume and pan controls of two stereo pair of condenser and dynamic microphones
  • Built-in FX: Reverb, Delay, Compressor
  • Sustain patch: Forte; Mezzo; Slide-in (velocity selection)
  • Mute patch: Single notes
  • Strum patch: Down; Up; Chord Palm mute; Open strings down mute; Open strings up mute; Body hit
  • Percussion patch: Wide stomp; Stomp; Low body hit; Mid body hits; Wide claps; Claps; Shaker; Snaps
Round Robin:
  • Sustain patch: 4 layers
  • Mute patch: 4 layers
  • Strum patch: 5 layers
  • Percussion patch: 8 layers
  • 2946 WAV format samples
  • 44.1kHz / 24bit, stereo
  • Total samples size: 2624 mb
System Requirement
Full version of Kontakt 5.6.8 or higher (NOT COMPATIBLE WITH FREE KONTAKT PLAYER)
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Via Torrent

Read More »

Toontrack - EZbass v1.0.5 (Sept 2020)

Two carefully sampled bass guitars– one vintage and one modern.

Arrange, compose, change and rearrange – without leaving the software.

Comes with bass MIDI for a broad range of styles.

Use drum or keyboard MIDI and have EZbass automatically create matching basslines.

Alter the performance or the subtler details of the MIDI using the built-in ‘Grid Editor.’

Audio to MIDI conversion based on the same technology found in Superior Drummer 3.
Features of Toontrack EZbass v1.0.5
  • EZbass 1.0.5 is now available to download using the Product Manager or from the “My Products” area in your Toontrack account. Please note that version 1.0.5 is required for the support of EZbass products released from this point forward (Q2 2020).
  • NEW
Added support for authorizing and using EBXs (EZbass sound expansions).
The CCs for modulation, damping and sustain can no longer be used for MIDI Learn.
Tooltips for GUI elements, e.g. buttons, will no longer appear after you have clicked on the element (until you move the mouse away from it and back).

Song Track
  • When exporting to audio, (2)/(3)/etc. is automatically appended to the file names if the files already exist.

Grooves Tab
  • In Tap2Find, a new button lets you search while keeping the active filters. The main search button clears the filters.
  • Buttons and knobs in Tap2Find have been rearranged a bit.
Grid Editor
  • “Smart Snap” has been changed into two separate options: “Magnet Snap” and “Snap to Notes.”
  • Added a header to the absolute/relative section of the “Snap to Grid” submenu of Options.
  • Added a “Timing” header to the Note menu.
  • The note pitch curve is now drawn in white instead of green.
Audio Tracker
  • Added support for dragging audio from Cubase.
  • Added snap to grid/transient settings.
  • Slide note selection area has been adjusted so you need to click on the actual notes to select a slide.
  • Moving notes with keyboard shortcuts now triggers preview.
  • Added selection rectangle in the regions view (Amount of Notes) for selection of notes.
  • Pressing backspace/delete can no longer remove a region. A remove region button was added instead.
  • Shift-click in Amount of Notes, Articulations and the grid view now selects all notes in between the clicked one and the latest selected.
  • Added grid lines to the velocity and amount views.
  • The audio input signal in standalone can now be seen on the audio LED in the tracker (when recording or preparing to record).
  • Audio waveform drawing is faster now.
  • Selecting with rectangle in Articulations and Amount views is faster/smoother now.
  • The attack sounds are now also included in the palm mute.
  • The attack sounds now also follow the selected tuning.
  • After loading a preset, the cent tuning was reset, although the GUI value was correct.
  • The main tabs were put on top of the MIDI Learn text and shadow.
  • If the GUI is closed while a modal dialog is shown, the faded background no longer covers the interface when the GUI is opened again.
  • When a moved EZbass sound library folder is located by the user at startup, the current project (the loaded project or default project) is now applied to the found sound libraries.
  • Improved parsing of multi-track MIDI files.
Song Track
  • Fixed some crashes on the song track when opening menus in certain scenarios.
  • Follow Host should no longer incorrectly get turned off with the claim that the same MIDI is coming from the DAW as is present on the Song Track – if such MIDI has been deleted from the DAW.
  • When exporting to audio, the cancel button did not work as intended when sounds were being loaded.
  • Dragging from the song track outside the plug-in window and back made a copy instead of just moving the dragged item(s).
  • Some minor adjustments/fixes to the GUI on the song track and the minimized song view.
  • On Mac, ctrl-click now works to open the song track context menu.
  • If a MIDI loop was added from the Audio Tracker, the notes would sometimes not be visible until the user did something to make the loops be redrawn, e.g. zoom.
  • Auto-transitions won’t be applied if there is no following chord to transition to.
  • Adding a MIDI block with damping after one without would sometimes add damping to the preceding block as well.
  • Changing bass note on a chord could make the bass note end up in the wrong octave.
  • Correcting a chord to a different bass note could end up moving notes instead of just correcting.
  • The “–” does not show up on a chord if the current notes fit into the current chord (like D notes on a D chord in C major).
  • Importing a MIDI file to the song track now also creates chords and a song part.
  • The song track tempo text editor will no longer show the tracker tempo if the tracker is the player in focus.
  • The “Drag groove here” text could become visible when undoing stuff on the song track.
  • The menu item “Add Chords to Chord Track” is now disabled if no chords can be added to the chord panel.
  • Changing groove in Replace MIDI mode could cause a clicking sound.
  • When copying or inserting a new MIDI block on the track, the copied block could get the wrong damping values if no damping values existed on the track.
  • Time signatures, key signature and tempos were not copied when duplicating a song track.
  • Transitions were removed when a loop was moved or copy/pasted on the track.
  • Chords in recorded MIDI were always analyzed in the key of C.
  • Notes on the red record block were not always visible when jumping back in the timeline while recording.
Edit Play Style
  • Changing Amount no longer causes a crash when a chord begins just before the end of a bar.
  • Adjusting Amount could lead to all CCs being duplicated on the selected MIDI blocks.
Drums & Keys Tab
  • Replace MIDI mode now shows the selected card in orange.
  • The “Replace MIDI” and “Export to Current Song Track” menu entries are now disabled in Replace MIDI mode.
  • The “Recent MIDI Files from Project” list in the “Select MIDI File” menu was saved in projects but not loaded correctly if the paths contained special characters.

Grooves Tab
  • Running a sync on the User MIDI folder could cause a crash.
  • The result view is now always scrolled to the top when new filters are selected.
  • After a search is complete, set keyboard focus on the result view so user can use keyboard arrows to navigate the results again.
  • Clicking/dragging/etc. in the result view while a search was in progress could cause a crash.
  • The “Search with Current Filters” button in Tap2Find was not enabled in “Record Melody” mode.
Grid Editor
  • Inserting a CC value when no MIDI is available on the song track caused a crash.
  • Right-click-drag in the Pitch editor no longer causes a crash.
  • Editing one CC curve would remove all other CC curves.
  • The vertical insert lines when using pen tool didn’t sync between grid and CC editor (with snap on).
  • Inserting CC nodes didn’t always insert them where the vertical line suggested (with snap on).
  • The vertical line that follows the mouse when the Split Tool is selected didn’t always show correctly where the split would happen if you’d click on a note (with snap on).
  • Extending a MIDI block in the grid is only done as far as necessary, not a bar extra.
  • On Mac, cmd-alt-click to split a note did not always work correctly.
  • Legato was sometimes incorrectly applied when polyphonic selections were copied.
  • Loading a project by double-clicking a project file and then browsing for missing libraries did not load the requested library in the project.
Audio Tracker
  • Fix for user-added notes sometimes disappearing.
  • A tempo map is now included when dragging MIDI from the tracker.
  • The tempo text is now updated continously.
  • Regions are no longer removed when recording over a previous recording.
  • Various graphics fixes to zooming, grid lines and numbers.
  • Various fixes to things not being updated when undoing.
  • The waveforms are now drawn on top of the supporting grid lines.
  • The tracker playhead and loop area now snap only to the time bar.
  • The play button in the tracker was enabled even though no audio input sender was connected.
  • The tracker insert/remove line was not drawn correctly in scales other than 100%.
  • The tracker grid could stay small if zoomed out and the window was resized.
  • The preview MIDI DnD block was not updated when loading a project or editing in the tracker grid.
  • Recording again in a tracker file that has sample rate other than 44100 Hz now works as intended.
  • Drag and drop of audio from Cubase should now work with any special characters in the file names.
  • Changing octave with shortcut now plays preview.
  • Preview note off times are now reset so that changing back to a note that was recently played does not cut off that note early.
  • Recording again and thereby making the audio longer did not create any notes after the original length.
  • The “Recent Files from Project” list in the “Select Audio File” menu was not cleared when a project was loaded, meaning it could grow very large and have duplicate entries.
Custom keyboard shortcut bindings that are displayed with non-ASCII characters (for example some language-specific characters) would not be correctly displayed after restarting EZbass. If you have such bindings from before, you can fix how they are displayed by rebinding them.
System Requirement
Windows 7 | 8 | 8.1 | 10 [ 64-bit]

Via Torrent 
Read More »

Toontrack - Legacy Of Rock SDX v1.0.0 (Sept 2020)

Not many can say that they were there when it happened. Eddie Kramer has been right smack center of it as it happened, making it happen and shaping its very essence with his bare hands for five decades and counting. We’re talking about rock – the sound of rock and the deafening impact the craft of engineering, producing and mixing it right has on how it ends up echoing through history. Meet audio visionary Eddie Kramer, the uncrowned king who shaped the sound of the legends that became immortal icons of rock and who in the process became a royalty of rock himself. This is his collection of drums and a true homage to classic rock as we know it.

The Legacy of Rock SDX zones in on Eddie’s formative years in the buzzing sixties London scene and continues on through the seventies. It includes five drum kits, each sourced and tailored to mirror a significant era or sound in Kramer’s remarkable career. All drums were recorded in Kramer’s studio of choice, Studio 1 at AIR in London, and captured through signal chains of vintage microphones as well as handpicked, rare and custom equipment scouted specifically for these sessions.

These drums rock. Take it from the man who only in the first two decades of his career managed to work with The Rolling Stones and The Beatles, record the entire Jimi Hendrix catalog, capture several of Led Zeppelin’s most pioneering albums and man the board as the original Woodstock festival was caught on tape. Welcome to a bona fide treasure chest of drum sounds – ready for you to hone, mold and shape to make your own dent in rock history with.

•Recorded by legendary engineer/mixer/producer Eddie Kramer in Studio 1 at AIR in London, UK
•Five full kits, all tailored after a significant era or sound in Eddie Kramer’s career
•Three extra kicks, six snares and a wide variety of cymbals
•Includes two timpani and 36″ and 60″ gongs
•Select kits include brushes, mallets and hand/finger samples
•Recorded with an additional five room microphones for playback in stereo or up to 5.1 systems
•Custom presets engineered by Eddie Kramer
•Includes a selection of drum MIDI inspired by classic songs from Eddie’s discography
•8 GB RAM (16 GB RAM or more recommended).
•For the full Installation of this product you will need approximately 180 GB of free hard drive space, plus an additional 180 GB is required for the installation process
•A working Superior Drummer 3.2.0 (or above) installation

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]
Via Torrent
Read More »

Waves Complete v11 (Sept 2020)

We are pleased to announce a new version of Waves plugins, Waves V11. Update to V11 to future-proof your sessions, ensure compatibility with the latest DAWs and operating systems (including MacOS 10.15 Catalina), enjoy plugin updates including new versions of the Renaissance plugins, get new plugins added to premium bundles, and more.

Meet your new musical FX partner: Super-suite of inspiring Phaser, Flanger, Chorus and Tremolo sounds, crafted from the best analog modulation studio classics. Dual Cascade engines allow you to ‘cascade’ any two effects for magical textures. Intelligent triggers respond dynamically to your playing in real time.

Kaleidoscopes is a secret weapon to make drums, vocals, synths and guitars move and breathe—perfect to give your mixes depth, color and feel; inspirational during recording and performance.

Analog Modulation Crafted from the Classics
In creating Kaleidoscopes, we were inspired by the sounds and colors we grew up on and love. The Phaser, Flanger, Chorus and Tremolo engines all reflect the analog units, guitar pedals, and tape FX sounds we associate with vintage eras and legendary artists. We chose to include the full palette of classic analog modulation sounds, a true “best of” collection, providing you with a rich, colorful and versatile tool.

Dual Cascade Effects: Serial or Parallel
Kaleidoscopes’ Dual Cascade architecture is unique to this plugin. You get two separate effect engines which can be manipulated in tandem—one fed into the other in series for surprising results, or both activated in parallel for insanely wide textures. There are almost endless configurations to choose from, and the intuitive flexibility to A/B them with a click. Listen to how wildly you can push this thing.

Intelligent Triggering by Your Touch
With Kaleidoscopes’ Trigger section, we wanted to create a truly exceptional effect that intelligently responds to your playing. Something you can call upon in recording sessions for bouts of creativity, or on stage for extra flare. Set the envelopes and threshold based on the part you’re recording or performing—and let the character and dynamics of your playing drive the effect. Kaleidoscopes’ engines will modify and glitch in real time.

System Requirement
Mac OS X 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [ 64-bit]

Read More »

Soundiron - Mars Symphonic Men’s Choir v1.5 (KONTAKT)

The Mars Symphonic Men's Choir is a comprehensive male choral ensemble library designed for professional film and television scoring, symphonic arrangement and music production. It is the most complete and detailed men's choir sample library available anywhere, with a sound and playability that cannot be matched. Mars was designed as the first offering in our now widely acclaimed Olympus choral series. To build this titan, we took everything we had learned from engineering, developing and programming previous choir projects we worked on over the years at Tonehammer (Requiem, Liberis) and applied them here. Our goal was to provide a level of total flexibility, deep functionality and total sonic power that professional composers need.

Mars covers a wide range of Latin, Russian (Slavonic) and Pure Vowel content, with a full set of chromatic articulations including sustains, marcatos, staccatos, true legato, clusters, falls, swells, effects and a trio of stellar male soloists. We recorded over 10 days at Montclair Presbyterian, high in the Oakland Hills, with a 30-voice hand-picked group of SF Symphony Chorus, SF Opera, SF Choral Society and Volti singers. It includes a pair of simplified wide stereo mic positions (stage and hall), giving you the flexibility to incorporate the full-bodied sound of Mars easily and efficiently into your mix.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Read More »

Steinberg - HALion 6 v6.4.0 (Sept 2020)

HALion is the most comprehensive virtual sampling and sound design system available today and excels the present creative process for producers and sound designers in all areas.

It covers the complete creative workflow from recording and sample editing to programming advanced synthesis and modulation setups. With HALion, create customized user interfaces and export ready-to-release instrument libraries with every step streamlined to the greatest extent.

The powerful set of oscillators for seamless sample playback as well as the next-generation synthesis make HALion a versatile creative tool in simply every situation. Its broad library includes thousands of high-class and deep-sampled instruments and cutting-edge synthesizer sounds for all kinds of musical genres.
Features of Steinberg HALion 6 v6.4.0
•State-of-the-art sampler and sound creation system tailored to the demands of professionals
•Advanced library creation tools including Macro Page Designer, drag-and-drop Library Creator and HALion scripting
•Powerful multi-timbral audio engine with disk-streaming sample playback, tone-wheel organ simulator and high-end virtual analog, granular and wavetable synthesis
•AudioWarp for cutting-edge time-stretching and pitch-shifting
•FlexPhraser module drives beats, arpeggios and complex tonal phrases
•Outstanding library including over 3,400 synthesized sounds and breathtakingly authentic acoustic instruments
•Flexible user interface with multi-monitor support allowing you to customize and save your own windows and screen sets
•Wide range of high-end audio effects, including REVerence convolution reverb, VST Amp simulation and many more
•Up to 192 kHz, 32 stereo outputs and 6-channel surround support

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

Mellowmuse - Plugins Bundle (Sept 2020)

Plugin set, consisting of:
  • Mellowmuse.ATA.v2.3
  • Mellowmuse.CP1A.v2.9
  • Mellowmuse.CP2V.v3.0
  • Mellowmuse.CP3V.v2.0
  • Mellowmuse.CS1V.v2.3
  • Mellowmuse.EQ1A.v3.2
  • Mellowmuse.EQ2V.v2 .6
  • Mellowmuse.EQ3V.v1.6
  • Mellowmuse.IR1A.v4.1
  • Mellowmuse.LM1V.v1.6
  • Mellowmuse.STAV.v3.0
System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

YC Audio - Loop Box v1.0 (Sept 2020)

YC Audio & Pyrit Music have teamed up to bring you ‘Loop Box VST’. This VST brings you 40 ready-made Loops with each one having 4 Instances available to use through the VST itself. These include dry, halftime, reverse and slice.

You also have a full FX Suite including Reverb, Attack, Decay, Panning and more.

Simply set the Loop you wish to use then key in the instance you wish to use i.e dry (Cmin), halftime (Emin), reverse (Gmin) or slice (Amin), then set the tempo and begin adding your drums.

The ‘Loop Box VST’ is designed to help with melodies by having them ready made for you. With strings, pianos, bells, choirs and more you sure have a variety to choose from… then all you have to do is add your own drums and you have a hit!

Product Details:
40 Loops
4 Instances for each Loop
Full Effects Suite
Windows/Mac Compatible

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Via Torrent

Read More »

Presonus - Studio One 5 Professional v5.0.2 (Sept 2020)

Record, produce, mix, master, and perform all from a single, intuitive application. Designed with ease of use at its core, Studio One® 5 is your creative partner from studio to stage. Studio One is driven by tools that enhance your creativity without getting in the way; we pioneered its drag-and-drop workflow that continues to be imitated elsewhere. Laborious tasks that take five steps in other DAWs usually only take… One. A popular example: you can convert MIDI to audio and back with a simple drag-and-drop.

PreSonus, the makers of Studio One, have released version 5.0.2 with new features and bug fixes, they include.

New features and improvements:
Podcast template now compatible with Studio One Prime

The following issues have been fixed:
Waveforms not updated correctly while editing logarithmic and exponential fades o applying clip gain envelopes on bent audio any clip gain envelope edits will cause the user interface to become sluggish
Potential crash on closing a song
Notes in “Mix” record mode are overwritten in certain situations
Not possible to paste note data from clipboard to an empty section of an instrument track
Parts are split on overdub[Impact XT] Eco Filter may cause ‘666’ errors on the console
Important Notes From PreSonus

UPGRADE CUSTOMERS, PLEASE NOTE: Studio One 5 is installed as a new application and doesn’t overwrite your previous version of Studio One. Both versions can be run on the same computer, just not simultaneously. Songs and Projects created in previous versions of Studio One will open in Studio One 5. However, once you have saved a Song or Project in version 5, you will not be able to open it in an earlier version of Studio One.

It is important to note also that Studio One 5 includes several changes to audio processing features, most notably in the updated Native Effects plug-in suite. Because of this, you may notice changes to the sound of your Song or Project. These changes may be subtle or quite noticeable depending on the processing that was used. Because of this, it is highly recommended that you retain a copy of your session in the earlier version of Studio One so that you can revert if you so chose.

Please also make sure that your 3rd party plug-ins are updated to the most recent version.
Ampire XT > Ampire (third-generation) compatibility: The “Ampire XT Classics” legacy extension isn’t compatible with Studio One 5. If you have been using any of the legacy amps in songs you are still working on, you have three options:

a) Finish the song in your previous version of Studio One.
b) Bounce tracks using Ampire XT Classics to audio before opening the song in Studio One 5.
c) Open the song in Studio One 5 and replace Ampire XT Classics amps with any of the new

State Space Modeling amps.
Existing Studio One users will find the update in their user account or by using the ‘Check For Update’ option in Studio One help menu. System Requirement

System Requirement
Windows 10 [64-bit]

Read More »

Tone Empire - OptoRED v1.0.0 (Sept 2020)

OptoRED is a transparent Optical Attenuator (compressor) based on the classic American unit used on countless hit records. This is part of our new “Enhanced Classics” series.

Compression is one of the most important tools in the arsenal of an Engineer, Music Producer & Artist alike. This is now a device that far surpasses its original intent which was to control the level of the sound automatically.

Today we use different types of compressors for inducing a “Vibe” & “Feel” to our instruments, percussion, drums, and voice. Digital and Analog Compressors have come a long way, but some classics are still preferred even today because they are now as much a part of a genre or musical style that they are now deemed as musical instruments in their own right.

At Tone Empire, we are inspired by these classic devices yet yearn to bring extended functionality to today’s modern musicians, engineers & Producers working on advanced systems with a need for more flexibility and extended tones. Hence we have now started a new series of processors called

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

KORG - Legacy Collection (Sept 2020)

Korg M1v.2.0.1 - the instrument does not need special introduction - it is a classic of electronic (and not only) music. The instrument itself was created in the mid-eighties, has its own handwriting, signature, as well as an unforgettable grand piano preset, which cannot be confused with anything else, a favorite feature of almost all electronic musicians.

Korg MDE-X v.2.0.2 - This multi-effect plug-in contains 19 high-quality effects from Korg digital recorders, workstations, synthesizers and stand-alone effects. As such, they are the perfect addition to any of the Korg Legacy Collection synths and are a great addition to any computer setup.

Korg monopolyv.2.0.3 - which went on sale in 1981 and is considered the culmination of Korg's expertise in analog synthesizers. It was released at the same time as Polysix and these two instruments revolutionized the world of synthesizers. Mono / Poly was regarded by many musicians as the best Korg synthesizer, with a number of unique characteristics.

Korg MS20 v.2.0.7 - software synthesizer provides full imitation of its legendary original. In addition, it offers advantages such as up to 32-voice polyphony and 16-voice unison. Flexible external modulation and MIDI clock sync settings have also been added, allowing for even more creativity.

Korg Polysix v.2.0.7 - simulates the eponymous six-voice analog polyphonic
Korg Polysix synthesizer, produced since 1981. With its full-voiced sound architecture, chorus / phaser / ensemble effects, and a range of performance functions (chord memorization, arpeggiator and unison memorization), the Korg Polysix became an instant worldwide hit. His recognizable string and backing sounds are still popular today.

Korg WAVESTATION v.2.0.3 is the software reincarnation of a 1990 instrument whose technology has won many awards and crowds of fans around the world. All these features are implemented in the software version: Advanced Vector Synthesis technology: mixing 4 sound sources using a joystick and Wave Sequencing - table-wave synthesis

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina

Via Torrent
KORG - Legacy Collection
Read More »

Dada Life - Sausage Fattener (Sept 2020)

Recreating the sound of their favourite producer is the goal of many an aspiring fader jockey. So when renowned dance production duo Dada Life teamed up with developer Tailored Noise to offer their sound in a plug-in called Sausage Fattener, we had to sit up and listen.

But is it all sizzle and no steak? Let’s get stuck in and try it out…

Sausage Fattener is a multi-purpose plug-in that offers fat compression at one end of the scale and full-on distortion at the other.

There are just two knobs: Fatness, which can give weight and oomph to anything you throw it over (be that a bassline, drum bus or even master output), and Colour, which adds edge and brightness.

The only other parameter is gain, which is important as the effect of the plug-in varies greatly according to signal level.

Despite having only two knobs, you can get a huge amount of variation from the interaction between them. This can be further tapped into by adjusting the gain.

We’d like to talk about the specific processes going on behind that cheery-looking sausage, but Dada Life and Tailored Noise are keeping tight-lipped. All they will say is that it’s designed to reproduce the gear/processes that always features on Dada Life tracks.

The crunch, edge, bite, weight and, well, phatness it can add is incredible for channels or complete tracks – we’ve even automated it and used it as an arrangement effect. The effect is described as making things ‘greasier’ and ‘phatter’, and we’d agree with that.

We could complain about the lack of level meters, the non-serious interface and any info on what the plug-in actually does, but that really would be to miss the point. Sausage Fattener is meant to be set by ear, to artificially beef up your audio for the greater good.

And you needn’t take our word for it, as other users are said to include Tiesto, Sebastian Ingrosso and Laidback Luke.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Read More »

iZotope - RX Post Production Suite v5 (Sept 2020)

RX Post Production Suite 5 includes the most intelligent tools iZotope for post production:
  • Dialogue Match v1.0.2
  • Insight v2.1.1
  • Nectar v3.2.0
  • Neutron Advanced v3.1.1
  • Relay v1.0.4
  • RX8 Advanced v8.0.0
  • RX Loudness Control v1.0.3
  • Tonal Balance Control v2.2.0
System Requirement
Windows 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Read More »

iZotope - Nectar Plus v3.2.0 (Sept 2020)

Introducing Nectar 3, the most sophisticated vocal mixing toolbox. Access every part of your vocal chain and get professional-sounding vocals in seconds.
A new level of vocal processing: First introduced in 2010, Nectar has found a place in studios around the world, offering world-class processing designed to produce professional results in seconds. With version 3, Nectar helps your vocal tracks get melodious by addressing every part of the vocal production chain, offering invaluable capabilities and innovative new signal processing.
The pinnacle of design: Every module in Nectar 3 has been redesigned with your time and experience in mind. With new ways of interacting with key module settings, a changing interface, exciting meter animations, and new contextual selection settings, this visual experience is so streamlined you won't want to go back to buttons and faders. Track resonances and remove them in real time with an innovative new equalizer with a new Follow mode, an innovative contextual interface and an improved level meter.
Vocal assistant: Like an extra pair of trusted ears, Vocal Assistant listens to your sound by detecting and automatically correcting volume mismatches, detecting resonance peaks, timbre variations and harsh frequencies. Vocal Assistant will intelligently tune EQ nodes, analyze dynamics and set suggested compression settings, remove annoying sibilant sibilants, create space, ambiance and more. Once you've reached the optimal starting point, add your own personal touch and create customizations to your liking.
Unmask function: Links directly to the rest of your mix to place vocals in the foreground while moving other elements of the mix. Unmask will link to any instance of Nectar 3, Neutron 2 Advanced (available separately) or iZotope Relay (included with Nectar 3) to perfectly fit vocals into the mix.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina

Read More »

iZotope - VocalSynth 2 v2.2.0 (Sept 2020)

The evolution of vocals
Color and shape vocals with five blendable creative must-haves and stompbox-style studio effects. A one-stop for past, present, and future vocal sounds

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

KORG - ARP ODYSSEY v1.1.3 (Sept 2020)

Combining the know-how of analog reproduction and elaborate modeling technology.
The ARP ODYSSEY synthesizer, perfectly reproduced in software.

Since the birth of the ARP Odyssey in 1972, it has been a renowned analog synthesizer used on many artists’ records. However, for a number of years it was quite difficult to come by. In 2015, KORG welcomed ARP Instruments’ co-founder David Friend as an advisor and began production of the hardware once again.

The KORG Collection ARP ODYSSEY is the software version of the 2015 ARP ODYSSEY reproduction. We used KORG’s proprietary CMT (Component Modeling Technology) to emulate the analog feeling and sound of the original as closely as possible. We’ve also given it numerous enhancements that are possible only with software, like high polyphony and built-in effects. It’s the most vintage and most modern ARP ODYSSEY that only KORG, with analog know-how and digital technology, could create. Be sure to get it.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina

Via Torrent
Read More »

Ample Sound - Ample Guitar SC 3.1.0 (Sept 2020)

Ample Guitar SC aim to bring a Fender Stratocaster 50th Anniversary Guitar sound to your studio.
* Neck, Neck + Middle, Middle + Bridge(Funk) three sample libraries.
* Stereo and Mono Modes.
* Sustain, Hammer On & Pull Off, Legato Slide, Slide in & out, Palm Mute, Pop, Natural Harmonic, Pinch Harmonic, Slide Guitar 11 articulations, Legato at random length & pitch & poly.
* CPC (Customized Parameters Control) – any controller can be controlled by MIDI CC or Automation.
* Double Guitar.
* Poly Legato and Slide Smoother.
* Alternate Tuner.
* Multiple Capo Logics – providing various options of automatic fingering logic to cover different performance such as solo, chorus, and so on.
* Grainy – Enhance grainy of attack and produce the random humanization.
AMP Simulator:
* Built-in AMP system, including 6 classic AMP models: Metal Double (modeled on Mesa Boogie Dual), Metal Treble (modeled on Mesa Boogie Triple), Lead 800 (modeled on Marshall JCM800), Jazz 120 (modeled on Roland JC120), 65 Twang (modeled on Fender 65 Twin Reverb) and 57 Delight (modeled on Fender 57 Deluxe).
* 7 matching cabinets:1×12 57D, 2×12 65T, 2×12 120, 4×12 60A, 4×12 60B, 4×12 Ro and 4×12 Ri.
* Each Cabinet has 8 mic options: U87, C414, MD421, SM57, E609, C414 XLS, R121 and M160.
* Room Mics.
* Hundreds presets, each preset featured a riff which users can go to Riffer panel and have a preview.
* String Roll Editor: can clearly show fingering, articulation, expression and even playing noise. Every note has 8 attributes – pitch, velocity, length, off velocity, articulation, legato, vibrato and bend, with which you can make a delicate lick.
* Dice – Random Riff Generator: A click will create a new inspiration because it is not simply a random algorithm. Rather, it summarizes the rules through analyzing a bunch of music scores.
* Multiple selection and operation, undo and redo etc. multiple MIDI tools, including fixed velocity, length legato and restrict, select, move, draw, erase, split, glue etc.
* 14 Strum notes + 28 ways to play for every chord.
* Strum Legato – legato articulations can be played while strumming.
* 4 humanization settings.
* Select and Detect 2 chord modes, any chords could be customized.
* Strum SEQ with customized rhythm.
* Delicate presets with MIDI export.
* High order 8-band EQ, intuitive control of frequency response, real-time visualization of input and output spectrum, support of soloing single band..
* 2-Line Compressor, real-time visualization of input and output signal, two detection modes RMS & Peak, support of soft knee, auto release and auto makeup.
* 6-Tap Echo, real-time visualization of the processing of stereo signal, can tweak the parameters of 6 echo points individually: feedback, pan, volume etc.
* IR Reverb, providing four types of IR: Room, Studio, Hall, and Larger Hall. 3D visualization of IR spectrum.
Tab Reader:
* The Tab Player can load and play several prevalent guitar tablature file formats. Users can load, display and playback any specific track inside a tablature file. When used in DAWs, the Tab Player also allows users to export the tablature as an audio file.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

iZotope - RX 8 Audio Editor Advanced (Sept 2020)

RX has long been the go-to audio repair and polishing suite for film, television, music, podcasts, video games, sample libraries, and more. With RX 8, we’ve created new tools and improved beloved modules to help you accomplish more in less time than ever. Rescue your rig with Guitar De-noise: powerful tools to control fret squeaks, amp hiss and noisy pick sounds.
Features of iZotope RX 8 Advanced v8
Guitar De-noise
Rescue your rig with Guitar De-noise: powerful tools to control fret squeaks, amp hiss and noisy pick sounds.
RX 8 De-hum overhaul
Is that an AC unit you hear switching on in the back of your recording? Or maybe you’re frustrated that your drummer lives in an apartment where no matter what room they’re in, you can always hear their fridge humming along? Never fear! De-hum in RX 8 Elements is here.
New 32-tab limit for Audio Tabs
Time is precious when editing audio in post. To help you tackle more work faster, RX 8 doubles the previous 16-tab limit, now allowing you to view and edit up to 32 files within RX Audio Editor. Cover more ground in less time with greater efficiency and in-app real estate.
RX 8 Wow & Flutter module
Physical audio recordings—such as tape and vinyl—inevitably fall prey to the elements as time goes by. This often results in pitch fluctuations in those physical recordings. Wow & Flutter is designed to correct this symptom regardless of the intensity of the modulating pitch. Use Wow to fix longer, sustained pitch drift, and Flutter to correct pitch variances that occur at faster rates. Wow & Flutter is the key to performing pitch-perfect music restoration in record time.
RX 8 Loudness Control
Prepare your recordings for final delivery with the detailed level readings and loudness-management power of the all-new Loudness Control module. Load preset loudness standard targets to ensure your audio conforms to broadcast requirements, and monitor your levels using the built-in numeric and histogram readouts for integrated, short-term, and momentary loudness. Plus, resize the module to fit your display perfectly and suit your unique workflow.
Spectral Recovery
Restore grainy audio from live-streamed, remote audio calls to crystal clarity with Spectral Recovery.
Music Rebalance
With improved source separation algorithms and the ability to generate stems from a stereo recording, you can easily re-animate a mix, remove or isolate vocals for a remix, or even create and export new stems for further processing and mixing.

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »

Ample Sound - Ample Metal Eclipse v3.1.0 (Sept 2020)

Ample Metal Eclipse is a virtual electric guitar that brings the sound of the ESP Eclipse I guitar to your studio.

For Windows users :
1. Install the AME_3_1_0_Installer.exe program
2. Install the Library Installer.exe library (select the directory for installing the library)
3. Run the Activate.exe patch (in the AME v3.1.0 line, click on the Activate button on the right and in the window that opens also click Activate )

For MacOSX users :
1. Install the AME_3_1_0_Installer.dmg program
2. Install the AME_Library_Installer.pkg library (select the directory for installing the library)
3. Run the AS Self-Activator v3.dmg patch (in the AME v3.1.0 line, click on the Activate button on the right and in in the window that opens, click Activate )

System Requirement
Mac OS X 10.11 | 10.12 | 10.13 | 10.14 | Catalina
Windows 7 | 8 | 8.1 | 10 [64-bit]

Read More »